Search results

Also well is 120 ft deep and I think I saw something about 72 ft , but would the pump be all the way down and how hard are they to pull out and check?

ok ive traced it back to well either pump isnt putting out enough or leak in well also I noticed that well plate that pipe and power go through in well which cover well pipe bolts are ruted apart and there is a crack in plate does the main well pipe the big one the pupm slides down have to...

If I close the hand valve after switch and pump has it at 30 psi and turn power off to switch it should hold the 30 psi? if it drops to 0 psi then leak is back to pump? is that correct? Thanks

Thanks is there a way to troubleshoot this?

Also how do I check to see if line from pump has a leak? Thanks Again!

Well pressure problems? « on: Today at 02:28:58 PM » -------------------------------------------------------------------------------- Hi All I have a private well submersible pump I noticed that the well Pressure switch contacts are staying closed and pump is continusely running...