Search results

Hello, I am in the middle of a foyer/ kitchen / hallway renovation. I am removing drywall and have to re route the upstairs hot and cold water feeds due to the addition of a food pantry and doorway where the pipes are currently located. My hot water heater (gas 40 gallon tank) is on...

Hello, There is a wall that extends out in our eat-in kitchen that I am looking to eliminate. In order to add the header that would make the ceiling flush from front to back, I would be cutting the floor/ceiling joists and pocketing in a 3.5" x 9.5" header in the ceiling using...

Hello all, After reading many posts here on the forum, I am going to switch over to electric hot water. I have some specific questions. Here is some background info: -1300 sq. foot house in PA. -Currently using 3 year old Weil-Mclain Gold boiler with Honeywell 8124 Aquastat, and an on...

Hello all, After reading many posts here on the forum, I am going to switch over to electric hot water. I have some specific questions. Here is some background info: -1300 sq. foot house in PA. -Currently using 3 year old Weil-Mclain Gold boiler with Honeywell 8124 Aquastat, and an...

Hello, Like many other people out there that heat with oil, I am ready to shut that boiler down. I have found the OnDemand coil to be unpredictable, causing scalding at times when the water that was in the coil reaches the faucet, changing water temperature depending on where the boiler...

Hello all, I have a different type of question regarding the interior door job I am about to do. Thanks for the tips on pricing, they were all helpful. On some of the doors the jambs will be very difficult to remove and replace due to risk of damaging intricate plaster work. (curvy...

Hello, I have been asked by someone I know to install 12 interior doors. I do work on the side for friends and family, etc. I need to come up with a fair price to charge. The house is an old Philadelphia row home. Some of the jambs are in OK shape, and others may need to be replaced with...

Hello all, I am new to the forum,, and I have my first question. I am an intermediate handyman type. I have done a fair amount of decent work for myself and family and friends. (Carpentry, plumbing, ceramic tile, framing, electrical, concrete, etc.) And I have a large amout of mid to...