Recent content by Zimm0who0net

Well, I guess I'll cross my fingers and call for my inspection...

Well, just to be thorough I figured I'd post the final result. Did I do it right? I brought out the torque wrench for the bands and tried to do 60 in-lbs, but it felt like I was on the verge of stripping out the worm gear and I hadn't gotten the "click", so I stopped. I'm thinking the torque...

Ahh, OK. So I guess the 1056-33 with an SRC-15 shear ring is not the proper fitting! I see how you would end up with a hub width gap between the pipe ends. Now I see the need for two couplings. If I had the flexibility you talk about I could probably get the end of the pipe out, put cement...

Thanks Wayne. I think I understand, but I'm not certain why I need 2 shielded coupling rather than just 1 if I use a coupling without a stop? In other words, cut out a section that's the depth of the hub so I can get the end of the pipe out that's in the hub. Put the coupling in without a...

So I finished my rough lines, went to pressure test and noticed a leak. Turns out I forgot to cement the whole damn joint. Here's a photo: That's a 3" to 2" wye. So I've tried to get it apart and I can't seem to . Probably not surprising given that it didn't blow apart with about 12' of...

Thanks! that makes my weekend..

I've got a fairly small plumbing system that I just put in a guest house we're building. 2 bathrooms, a bar sink and a laundry. It's generally PEX-A with some copper stub-outs. To test, I turned the system on, then turned off the main ball valve and I've been watching for pressure loss. It...

Interesting. I guess I hadn't considered balancing upstream of the valves.

Not to step on my own post, but apparently this shower is pressure balanced: How? Is the T connecting the hot and cold some sort of voodoo magic? Is there a supplier for this mystery sweatable pressure balanced valve? Here's a link to the web site...

So I'm wanting to put in an outdoor shower next to a CMU retaining wall I'm currently building. Most of the ones I've seen have simple individual valves for hot and cold. Like this: How does this not violate IRC P2708.4 (the code requiring pressure balancing mixing valves, etc). I don't...

Thanks! So maybe there's been sewer gasses entering the kitchen all this time. Glad I finally caught this. I'll finish the fix and give an update a few weeks after

So a little over a decade ago I remodeled my house. The kitchen moved and the plumber decided that rather than saw cut a huge swath of slab he would go through the stem wall and underground to connect with the main sewer line running to the street. Inside, the line came through the stem and...

Not really an option. Going one direction would require going under a driveway and open up the whole same can of worms. The other direction would be about 80’ and it would have to run right next to the base of a wash.

Incidentally, the poor plumber is watching from the sidelines, essentially saying "I'll do whatever you and the inspector decide".

Can someone clarify a few things for me. I have a poly natural gas line coming from the meter to a guest house about 120 feet underground. It needs to get to an outdoor water heater on the opposite side of a structure. Easiest path is underslab starting with the poly line and running...