Recent content by seszoo

Thanks , Old residential well pumps aren't my expertice and I'll pass along the gauge needed .. to him , the pump runs smooth and pressure to the house taps is pretty good , it just won't shut off , If it was with the pump and he doesn't want to pull it , was thinking of...

Was on a job changeing, out some electric ,home owner said his pump wouldn't shut off and could I look at it ,Submersible 130 ft down , 2 wire pump, could have been there for 40 + yrs.. ,Had a new pressure switch ,no gauge to tank with no other valves , all out going shut...

Thanks , for your reply ,it'll save me just to tap off to a manifold and go to sink and bathroom taps at the new place and leave the existing in place

Should I leave the pressure switch at the existing locacation which will end up being the second pressure tank in line when I install the new tank in the new cottage . Haven't installed at new place , the well line just passes through there right now with a simple shut off...

Have a new house , am wanting to put a new pressure tank and switch in with a new 220v line to well pump , can I just leave tank in existing house and disconnect press. switch and use as a storage tank for existing house and have the new tank first in line . Have not...