Fitter30's latest activity

No it's ok it's not under the set screw.

Well pump will go to 0 psi when off unless there is a solenoid valve that the float switches but then you would have a pressure switch...

Does the pump lose prime? Was spring check valve installed at the bottom right above the sand point.

Go back to the breaker first see if power is leaving.

What is the pipe coming out of? Air handler coil before blower has to be trapped before blower no trap if coil is after blower. Have...

15 gpm taken at well head. 325 ' including a few fittings 21 lbs + 16.575 lbs 37.575 lbs Hopefully the pump can produce...

Have any idea how many feet of tubing the floor heat has and size of pipe By using a water heater for both dhw and heat there's two...

When tighting or loosening that nut put a hold back on the handle. I haven't had very good luck with that style of valve. That pic with...

Looks similar to https://parts.rheem.com/product/RPD-SP623335...

If you can get the exact replacement take a picture of the board and wires. Ebay might also have it and appliance parts on the web.

Yorkshire in England? Never seen anything like your setup. But that devise has city water pressure on it. Needs to changed out now...

delete

That pic of the burner think you might have a compromised boiler section (leak). By the way the flame disappears. Take the operating...

Any brand of a condensing boiler is only 95%+ efficient with return water under 140° above 140° 87%. Confused about your temperatures...