Recent content by BigRob_NH

  1. BigRob_NH

    Alternative to permanent Sump Pump

    it is draining but not at full capacity. over the years I'm sure theres silt, leaves and whatnot in it. with that final surge of rain, it just briefly overwhelmed the drain. do these work...
  2. BigRob_NH

    Alternative to permanent Sump Pump

    Good afternoon folks, We recently had 2 weeks where we got something like a total of 14" of rain. Record flooding and whatnot. My home is basically on top of a hill and has a french drain/drain tiles around the base of the foundation that drains out to the curb. At the final peak of the...
  3. BigRob_NH

    Question re: repair fitting

    Thanks for the input folks. Ran down to homers and the parts to build a new one cost all of 7 bucks. Now all I have to do is cut/cement it properly. Have a great weekend.
  4. BigRob_NH

    Question re: repair fitting

    Good morning folks, I'm in the process of installing a new vanity top. pulled the old vanity top/sink out and have the new cultured marble top in place. The drain hole, of course, doesn't line up. I need to move it back about an inch. No problem, just use a repair fitting. I grab...
  5. BigRob_NH

    Plumbers putty on cultured marble

    Yes, that looks to be exactly what I need. Thanks Redwood! And yes, it was not at homers. I'll have to do a bit more looking around.
  6. BigRob_NH

    Plumbers putty on cultured marble

    Thanks for the quick reply jimbo. I'll head on down to homers to see what I can find.
  7. BigRob_NH

    Plumbers putty on cultured marble

    Good Afternoon, I'm about to install a couple of new cultured marble vanity tops. I know not to use plumbers putty when working with granite but is it also to be avoided with cultured marble?
  8. BigRob_NH

    Another toilet install resulting in sewer smell

    Redwood, It looks like things are OK now. I think he just got sloppy, was rushing or whatnot. The first time we pulled the toilet he said it looked like he had caught it when seating it and it had been pushed askew. So, the second ring he installed he sorta squished down a bit w/his...
  9. BigRob_NH

    Another toilet install resulting in sewer smell

    Hi Jim, Thanks for the response. I didn't observe the raising of the original flange. He cut out the original, ran new 3" PVC and a new flange. There appears to be some sort of PVC spacer underneath the current (new) flange. Screws were run through the flange and the spacer into the...
  10. BigRob_NH

    Another toilet install resulting in sewer smell

    Good evening folks, I have the same issue as a thread started just a few days ago where a recently installed toilet is resulting in a sewer gas smell. In my case I removed the old toilet and had a tile floor installed. I then had a plumber in to raise my flange, reseat the toilet etc...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks