NoobCali
New Member
I’ve tried to search this but couldn’t find anything exact and I apologize if it’s been asked before.
Recently I had a slab leak found and repaired, post slab leak repair almost about 2-3 hours after the plumber had left, one sink master bedroom stopped producing any water only on the hot side. Every other sink was fine so I figured when I have time I will clean out the cartridge and that might fix the problem.
But now another sink in the guest bathroom is not producing any water at all, this time it’s on the cold side only, since not many people use that sink beyond checking it initially to make sure all other sinks worked (it did at the time), no one has checked that sink until I did today. Now I’m curious why slowly my sinks are clogging and what should I do? I called the plumber and they said clean the cartridge when it was just one sink.
Recently I had a slab leak found and repaired, post slab leak repair almost about 2-3 hours after the plumber had left, one sink master bedroom stopped producing any water only on the hot side. Every other sink was fine so I figured when I have time I will clean out the cartridge and that might fix the problem.
But now another sink in the guest bathroom is not producing any water at all, this time it’s on the cold side only, since not many people use that sink beyond checking it initially to make sure all other sinks worked (it did at the time), no one has checked that sink until I did today. Now I’m curious why slowly my sinks are clogging and what should I do? I called the plumber and they said clean the cartridge when it was just one sink.