I’m in the middle of a bathroom remodel and am facing a small dilemma. The existing 4” ID cast iron connector has a busted flange and is 11” from the wall vs the 12” I need for my Woodbridge toilet. I’ve found a few offset adapters but they would raise the toilet about 2” higher which wouldn’t work, any ideas?
basically I need something like this with a 1” offset
https://www.homedepot.com/p/Oatey-Twist-N-Set-4-in-Cast-Iron-Toilet-Flange-436532/100171634
this is what I’m finding which would raise the flange height
https://m.ferguson.com/product/prof...-standard-closet-flange-pfcfcoppk/_/R-7000231
basically I need something like this with a 1” offset
https://www.homedepot.com/p/Oatey-Twist-N-Set-4-in-Cast-Iron-Toilet-Flange-436532/100171634
this is what I’m finding which would raise the flange height
https://m.ferguson.com/product/prof...-standard-closet-flange-pfcfcoppk/_/R-7000231