Billfig
New Member
Square D with lever, has 2 posts for adjustment, the center proudest stud for Range"turn nut down for higher cut-in, or up for lower cut-in. I thought this one is for raising overall pressure??
lower stud off to side is Differential "turn nut down for higher cut-out pressure or up(loosen) for lower cut-out-so this one is used for overall higher pressure?
I can't seem to get the pump to come on later-say when she goes down to 30psi? I turned pump off and drained, when gauge hits BAM! switch clicks and gauge drops to 0.
lower stud off to side is Differential "turn nut down for higher cut-out pressure or up(loosen) for lower cut-out-so this one is used for overall higher pressure?
I can't seem to get the pump to come on later-say when she goes down to 30psi? I turned pump off and drained, when gauge hits BAM! switch clicks and gauge drops to 0.