dexler
New Member
- Messages
- 7
- Reaction score
- 0
- Points
- 0
Hello, I have a Delta faucet model 200 which developed a small leak on the copper tubing that connects to the cold water pipe it looks like a tiny 1 millimeter hairline crack. Here is a picture where the leak is (red line points to the leak):
My idea was to solder over where the leak is, would this stop the leak permanently or would you consider this to be a bandaid solution? A replacement faucet would cost me $90 Thank you.
My idea was to solder over where the leak is, would this stop the leak permanently or would you consider this to be a bandaid solution? A replacement faucet would cost me $90 Thank you.
Last edited by a moderator: