(206) 949-5683, Top Rated Plumber, Seattle

Plumbermurrieta

Replacement Delta 600 Series Valve

Rate this Entry
Quote Originally Posted by Plumbermurrieta View Post
The pipes are sweated into the base of the unit. What you need to do is get all the plastic off of it, and heat the base up with a torch. You should be able to pull them out with a pair of pliers. Once you have them out just clean up the remaining ends, and flux them good. Reinsert them under heat, and then apply more solder.

They will be a little shorter, but that only requires longer flex hoses, and not a new unit. If they are too short to put back in as is then you will need to remove the threaded ends also and solder in a new piece of copper tubing. This is available at most hardware stores, and hobby shops that sell R/C airplanes.

Submit "Replacement Delta 600 Series Valve" to Digg Submit "Replacement Delta 600 Series Valve" to del.icio.us Submit "Replacement Delta 600 Series Valve" to StumbleUpon Submit "Replacement Delta 600 Series Valve" to Google

Comments