Balanceing Three Shower Tiles in a loop
by, 06-19-2011 at 06:05 AM (1008 Views)
Hello folks, Looking for assistance in connecting three Kohler Shower tiles in a loop to ensure the same flow through each. This shower system has five heads, one main, one handheld and the three tiles. The supply pipe is 3/4" to the Temp Control Valve then 3/4" to a Diverter Valve which directs the water, through 1/2" PEX to the afore meioned heads. The three tiles are in a triangular configuration, so that when your sitting on the bench you have two at your lower back and one at your upper middle.
In the attached diagram the pipe is all 1/2" Pex with brass elbows and tees. The tees go to drop ear fittings whic would then have nipples fitted for the head to attach to. I may be able to get rid of the elbows if I can get the PEX in a tight enough bend.