We have a one year old water well for watering our 12 zone yard. Just a month ago it stopped working so we replaced the submersible 1 hp Wellsub pump, pressure tank and pressure switch. I worked for about two weeks and now the submersible pump motor is burned up? The tank pressure is set at 38 psi and the pressure switch is a 40/60 the well is 70 ft deep with the pump at 60 ft. Any ideas on what is causing the motors to go out?
Originally Posted by Rodney
Ran out of water had load delivered have 20 ft of water above foot valve. Put new foot vale on filled line with water as well as line going into house.\
Shallow well jet pump. When I prime pump after several tries get up to 25lbs can no get any higher
Im just posting this to let everyone know that i know a guy that came up with a solution to water problems and ive seen it working all over the place and havent seen one that didnt work yet, just go on google and search for lawerence Rehaluk and click the link that says a new twist on a old idea and he has all your solutions if you need to call him his number is 1-306-782-3582.
Have worked on this for over a week now, tired. When using the sink sprayer my water comes from spout and sprayer in equal amounts, have cleaned all inside parts and replaced the diverter with no help for correction, this is a single handle Delta faucet with spray on side. Need help. This is by far the best answer forum i have run across. Thanks, Bill
Originally Posted by taz110
From the shower (hot side ,cold side and diverter on tub spout) I would turn on the hot and cold sides,and within a second or two water would dribble/flow weakly out of the shower head before the diverter in the tub spout was pulled up to shower mode. These things i did check if helps: All piping is 1/2" copper from shower valve to shower head, 48" from shower head to hot and cold assembly/valves. Could it possibly be the plastic diverter valve inside the tub spout? Any