(206) 949-5683, Top Rated Plumber, Seattle


  1. Replacement Delta 600 Series Valve

    Quote Originally Posted by Plumbermurrieta View Post
    The pipes are sweated into the base of the unit. What you need to do is get all the plastic off of it, and heat the base up with a torch. You should be able to pull them out with a pair of pliers. Once you have them out just clean up the remaining ends, and flux them good. Reinsert them under heat, and then apply more solder.

    They will be a little shorter, but that only requires longer flex hoses, and not a new unit. If they are too short to put back in as is then you will need to
  2. Any tricks for dealing with misaligned sink drains?

    Quote Originally Posted by Plumbermurrieta View Post
    Each tool we use has a specific purpose for which it is best suited. Leak detection is no longer an art but a process of elimination.
    Our handpicked, experienced, and well respected plumbers all go through one-on-one personal training, sometimes with the manufacturers of our equipment. Who better to rely on than a company full of the top craftsmen of the trade.

    Our leak detection process typically involves the following steps:

    Visual Inspection - With our specialized