After a couple of weeks of
"Will call you Tuesday to let you know when we have time, if there are no emergency jobs." and
"Next Thursday we will know when we can make it." and
"We need to do our emergency jobs first" and
"Your slotted in on Friday next week"
This was the service I received from Modern Drainage here in North Vancouver. My clients needless to say where less than
Updated 11-21-2012 at 07:22 AM by johnfrwhipple
I picked up my new Laticrete 5"x5" tile insert drain yesterday from my local supplier - here in Vancouver. The drain is neatly packed into on box that includes the bonding flange and tile insert section. Like a Kerdi drain from Schluter the drain is available in either ABS or PVC and I ordered the ABS since most Vancouver installations use this black plastic piping.
I was asked to clean up a two bedroom condo up in Whistler not far from my North Vancouver home this week and thought I would share this process with anyone keen enough to tackle the cleaning job of a Schluter Sytems Kerdi drain. The strainer portion of the Kerdi drain comes off easily with just a philips screwdriver unless the tile setter grouted the screws over like the one I worked on.
To access the screws first I used the tip of a sharp drill bit to loosen up the dried grout.
Updated 06-13-2012 at 05:53 PM by johnfrwhipple