S steter New Member Messages 2 Reaction score 0 Points 0 Nov 14, 2006 #1 I recently installed a new 30/50 pressure switch. It worked fine for a couple months, but now it will cut in at about 37 psi and off at 50. With the tank drained, the air pressure is 28 psi. Any ideas on what is causing this?
I recently installed a new 30/50 pressure switch. It worked fine for a couple months, but now it will cut in at about 37 psi and off at 50. With the tank drained, the air pressure is 28 psi. Any ideas on what is causing this?
R Rancher Guest Nov 15, 2006 #2 If it's a new switch, and the pipe to the switch was clean, it must either be: 1. A bad switch 2. A bad guage Rancher
If it's a new switch, and the pipe to the switch was clean, it must either be: 1. A bad switch 2. A bad guage Rancher
