View Full Version : Vent pipe in the slab

11-02-2006, 04:46 PM
I have a master bath with dead space behind the existing wall (used to be an old closet). The current bath is ~6'x7' but could be 12'x7' when the dead space is utilized.

The bath has only a shower and the vent pipe runs up the back wall. There is sufficient room to install a tub in place of the shower, but the vent pipe either has to be moved or re-routed.

Would it be best to raise the height of the tub and re-route the vent, or have a pro physically move the vent in the slab.

Does anyone have experience with this? Any pointers would be appreciated.

Thanks very much