Case 3000 replacement

I have a Case 3000 wall mount toilet. It has been installed in this home for about 35 years. Unfortunately, the ceramic area around the upper hanger assembly has cracked, and it needs to be replaced. This toilet is installed in a very small area so the length of the toilet is important. The current case toilet is 27.5 in. long, and I would prefer a shorter model if I could find one. I'm concerned about my old plumbing and the 1.6 gallon flush toilets of today. Any suggestions? I think the "Glenwall" is going to be to long.

Thanks

Dave

Case Toilet Link

https://terrylove.com/wwwboard/messages/16741.html

Here is a link that might be of interest.

Many "normal" toilets are shorter than that one, but replumbing the supply and drain might be costly.

can the 3000 be fixed

Hi everyone:
I'm now wondering if my case toilet can be fixed. The ceramic area where the upper portion of the toilet hangs is cracked pretty badly. Can it be repaired? Where would I go? Can a new upper hanger assembly be used so that the toilet would need two new holes drilled through it? Any thoughts

dave

Repairing structural cracks in porcelain are unlikley.