PDA

View Full Version : Power Gravity Installation



gotpeter
01-02-2005, 10:32 AM
Where can I get installation instructions for a Power Gravity Fill Valve (TSUO4A.5)? I would prefer not to do this by the "braile" method but have had no luck (Google, ****, Toto, etc.) finding anything. A plumber I am not, but, at their prices :eek: , am more than willing to tackle projects such as this.

BTW, I have had intermitent problems with water running in this Toto (Supreme, I think) system since it was installed four years ago. Yes, the sled flap has been replaced but the problem has gotten progressively worse. The fill valve is my last gasp. Dunno what to do if that does not work.

Terry
01-02-2005, 10:48 AM
The Toto uses a standard Korky quiet fill valve.
http://www.terrylove.com/images/hunter/quietfill.jpg
Instructions for cleaning are here (http://www.terrylove.com/hunter.htm)

If cleaning doesn't work, you can either replace the valve or sometimes just replacing the assembly cap does it.

http://www.terrylove.com/images/toto_cst854_inside_tank.jpg

If the water is overflowing the overflow tube, then the fill valve is not shutting off.

gotpeter
01-02-2005, 03:27 PM
I replaced the entire valve and it is working great.
Thanks for the help.

Peter Fairchild