I have installed two Drake Toto toilets. It appears that one bathroom floor is not as level as the other. I lose about one inch of water in the bowl in the unlevel flloor after a flush( they share a common vent pipe so this should not be the issue?), the other toilet loses no water after a flush and is level.. The uneven toilet is about 1/8 inch off level .
My question is with these Toto Drake Toilets will this differnce have any impact on the flushing capacity of waste
If so how do I level the toilet in question.
I would hope it makes no difference.
My question is with these Toto Drake Toilets will this differnce have any impact on the flushing capacity of waste
If so how do I level the toilet in question.
I would hope it makes no difference.
