Sched 40 pipe 2"

Users who are viewing this thread

Syncman

Member
Messages
31
Reaction score
1
Points
8
Location
Marietta GA
Spa problem. Cut between 2 PVC fittings to remove a cracked part. No pipe was showing, so I cut between the 2. This means no pipe showing to glue the new fitting. The remaining fitting is a 5 port flange that is not cracked.

http://www.****.com/itm/2-S-PVC-Manifold-5x-3-4-Ports-Spa-Waterway-672-4400-/261077335685?pt=LH_Defa...

This is really locked in there. To change that as well would mean re-piping half the tub, plus a lot of insulation stripping. Is there a "repair fitting, coupling, elbow " that would go INSIDE the remnants of the 2" pipe, instead of outside? Maybe a different diameter pipe? A pipe Hog wont work because of all the pipes from another manifold are in the way.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks