View Full Version : Toto Drake problem
12-19-2005, 10:42 AM
I have had a couple of Drakes for about a year now - great toilets! However, one of them is not shutting off properly on refill. I have to fiddle with it a bit to keep the water from going over the fill tube and running continuosly. The valve looks to be completely self-contained, so there does not appear to be much I can do about it. Any suggestions? We are about to leave for a trip and would like to take care of this for the housesitter.
p.s. Terry, is this thing still under warranty?
12-19-2005, 11:28 AM
The fill valve may need cleaning.
Cleaning or replacing the assembly should do it.
Lowe's Hardware sells the Korky assembly cap for less than $2.00
Instructions here (http://www.terrylove.com/korky/)
12-19-2005, 02:26 PM
Thanks, Terry. I'll give the cleaning a try. If that doesn't work, can I order that part from you? The places around here tell me they don't sell to the general public.
01-02-2006, 12:53 AM
I followed the instructions you provided and the Toto seems to be working OK. Many thanks.
I still hear a slight "hissing" noise, though - sounds like a tiny trickle of water is still coming in after the water intake shuts off. Sounds like a new valve is in my future...