Lifespeed
Member
I am starting a re-pipe project Monday. Given that one of the bathrooms tub/shower valve will be accessed by tearing into the tile, I have decided this is a good time to replace the old fiberglass tub with a Toto cast iron model 16-3/4" X 59-3/4" X 32". The tub doors will also need to be replaced.
I am looking for recommends for glass doors. Sliding is required, the toilet is too close for a swinging door. A trackless arrangement might be nice. Clear glass with brushed nickel hardware would match the rest of the bathroom.
Any suggestions on brands or models? I would like to keep it under $500, although could go higher if necessary to get good quality. I intend to only do this once.
I am looking for recommends for glass doors. Sliding is required, the toilet is too close for a swinging door. A trackless arrangement might be nice. Clear glass with brushed nickel hardware would match the rest of the bathroom.
Any suggestions on brands or models? I would like to keep it under $500, although could go higher if necessary to get good quality. I intend to only do this once.
