Need help identifying faucet cartridge
- Thread starter dalexona
- Start date
A picture of the faucet would be a big help.
Sponsor
Paid Advertisement
Plumber111
In the Trades
Looks like a PP Ceramic.
Jimbo
Plumber
there are a million ceramics which look very much alike, but the thread on the outer end of the body should help. But how about some clues...photo of handle???
hj
Master Plumber
- Messages
- 33,613
- Reaction score
- 1,057
- Points
- 113
- Location
- Cave Creek, Arizona
- Website
- www.terrylove.com
faucet
PP does not have a short stem with outside threads for the trim ring. The "fine" splining could be Kohler or Grohe.
PP does not have a short stem with outside threads for the trim ring. The "fine" splining could be Kohler or Grohe.
Last edited:
Plumber111
In the Trades
Ate too much chicken.
Last edited:
hj
Master Plumber
- Messages
- 33,613
- Reaction score
- 1,057
- Points
- 113
- Location
- Cave Creek, Arizona
- Website
- www.terrylove.com
99% sure it is Grohe.
Jimbo
Plumber
Once you know the name, it gets easier! Look here http://alfanoplumbingparts.com/pdf/CeramicCartridges_EtoM.pdf
at Hansgrohe, HAN4004
at Hansgrohe, HAN4004
Hackney plumbing
Homeowner
Alot of those stems will interchange between brands. Measure it wil a caliper and match it up. Its not a grohe stem like I have in stock.......They all have clips below the splines. There are so many cheap knock offs it can be hard to tell from looks.
Similar threads
