PDA

View Full Version : New QualityCraft One Piece Dual Flush 1000G at Costco $150



klepper
10-31-2011, 03:05 AM
Well as of early Fall-ish 2011, Costco is now carrying a new toilet, different from the old ones. I couldn't really find much about it on the internet, so I will post everything here for the ages. Post any experience you have with it, etc. I think I will get it. It's $150 at my local Costco.

Here are the specs:

Dual Flush (1.1G\4 liters & 1.6 G\6 liters)
One Piece
1000G
16" Height ADA
Elongated
Insulated
2" Trap
3" flush Valve
Slow Seat
5/20 year fittings/ceramics warranty
Install kit.

Model # 6TQS062WHI OR 6TQSO62WHI (O or 0?)
Costco Model # 598357
Nexstyle Bath
Made by Quality Craft in ****EDIT**** China, not Canada, my bad.

I can't seem to find the specific model on their website, but this is the nearest one:

http://www.qualitycraft.com/product/dylan-het-dual-flush-one-piece-tib-575

But it is NOT the same.


Edit: I'm just posting this as a public service. A lot of people have costco memberships, a lot of people believe in their quality, Since there is no google hits of this toilet, (they sold out very quickly) I thought here would be a good place. No need to be hating and flaming. Sheesh.

jimbo
10-31-2011, 06:36 AM
What gives you the impression is it MADE in Canada?

Cube: 0.361m3 / 12.75ft3

Container Quantities
40'HQ container to Canada
Pcs per container: 280

http://www.qualitycraft.com/


SHANGHAI
Room 302, No. 1698 Yishan Rd,
Shanghai, China, 201103
Tel: 86-21-52212803-52212805-52212807
Fax: 86-21-52212815
COLLINS CO. LTD.
C Flat, 6F, 4th Bldg.Huaqiang N. Rd., Shenzhen, Guang Dong,
Tel: 86-755-8376-2457 Fax: 86-21-646968215 COMMEND LTD.
Unit A & B, 12F,CDW Building, 388 Castle Peak Rd.,
Tsuen Wan, N.T., Hong Kong
Tel: 852-2745-9878 Fax: 852-2786-9311
TAIWAN
COLLINS CO. LTD.6 F, 201 Tunghwa North Road,
Taipei, Taiwan 10544
Tel: 886-2-2712-5311 Fax: 886-2-2715-2716





(http://www.terrylove.com/article/about)

BobL43
10-31-2011, 08:15 AM
you mean Taiwan is NOT in Canada?

LLigetfa
10-31-2011, 08:26 AM
Two observations... the refill tube appears to be set too far down the overflow tube and the 1-2 buttons are installed backwards/uʍop ǝpısdn.

Terry
10-31-2011, 10:54 AM
I have one of those flush valves on my desk right now. If you can get the part, the replacement is a spin out and lift on the flush valve and that gets access for the seal.
The customers toilet we worked on had the parts ordered up. That took a few weeks.

These parts are not carried in hardware stores. You will have to contact Costco for parts.

With most toilets, any hardware store could help you not. Not with this brand. Keep your paper work that came with the toilet. Even looking on their website, isn't much help.
http://www.qualitycraft.com/

http://www.terrylove.com/images/costco_waterridge_one_piece.jpg