Ron Buster Jackson
07-30-2011, 04:26 PM
Hello Terry
I recently removed a cast iron flange and tried to repair it by installing a 3" into the pipe (too small) and a 4" to big. My next attempt was to get a 4" flange to fit over the pipe (slightly too small). Now here is where the problem comes in. In an attempt to shape the pipe to fit inside the 4" flange, the pipe chipped below the rest of the pipe. Photos won't download. Note: 3" is extremely too small and 4" to big to fit in pipe. \\ Thanks
Pictures need to be 800 pixels or less
I recently removed a cast iron flange and tried to repair it by installing a 3" into the pipe (too small) and a 4" to big. My next attempt was to get a 4" flange to fit over the pipe (slightly too small). Now here is where the problem comes in. In an attempt to shape the pipe to fit inside the 4" flange, the pipe chipped below the rest of the pipe. Photos won't download. Note: 3" is extremely too small and 4" to big to fit in pipe. \\ Thanks
Pictures need to be 800 pixels or less