PDA

View Full Version : 9.25 inch rough



JLW05
07-16-2011, 10:25 AM
I recently had a complete bathroom renovation. After the tiles were installed I realized that my 10" rough is now 9 1/4 inches. The contractor was able to squeeze a Cadet 3 round toilet into the space but it is actually touching the wall. I live in a co-op with neighbors below and above and have a cement floor. My toilet is aligned next to the bathroom door so I have a very limited depth the toilet can be and still be able to open the bathroom door (27" maximum, probably less). The Cadet 3 is 26.25".
I cannot clean behind the toilet, don't really care for the toilet and would like to replace it. Do I have any options whatsoever? Will it be possible for most 10" rough toilets to fit my 9 1/4 rough? I have seen the Toto Drake get great recommendations but at 28" it won't work for me. Any other toilet recommendations or suggestions?

Thanks

Terry
07-16-2011, 03:10 PM
Which tank do you have?
A/S does make a space saver tank for the Cadet 3.

JLW05
07-17-2011, 08:16 PM
I think I have the space saver - the depth is 26 1/4"