Oatey #5 vs. Oatey #95

I don't want to be a pain, but does anyone know the difference between Oatey #5 solder paste vs. Oatey #95 tinning flux?

I'm not clear on if I can use either of them as flux for soldering copper, or if one is the wrong thing to put on the pipe and the fittings?

Lee

You can use either of them to solder copper pipe (and some other metals). The tinning flux is good, and a little easier to use, but if you want a really neat looking joint, #5 may be better as the solder (tin part of the #95) will leave solder wherever it touches and is hard to wipe off once heated.

Third time's a charm.

Thanks a lot!

I really hope to get this job right this time. Third times a charm. LOL.

This house is filled with rotted out copper from well water...

Lee