Best 10" rough-in toilet

Just remodeled our bathroom. Last item was to install to a new Toto Drake toilet. Only problem is it doesn't fit. I've only got 9" from the C/L of the drain to the wall (actually the molding). The Drake doesn't fit. The old toilet was a piece of junk and required plunging 1x per week at least.

What's my next best option? The plumbing supply store says the only Toto that would fit is a Carlyle $600 which is way too much.

I'm looking at Gerber Maxwell, Avalanche, or Ultra Flush or Kohler Wentworth. I need your help cause sharing one bathroom with a wife and two teenage girls is getting old.

I sell the Toto Drake 10"
Either the CST744EF.10
or the CST744SF.10
The bowl is C744EF.10 and it can use either the ST743E or the ST743S tank.
For this, you would need 9-1/4" to the "wall".

Thanks Terry! What is the difference between the "EF" and "SF" ?

The Toto Drake I have is CST743E-01

E = 1.28 gallons Watersense, which is needed for some rebates.
S = 1.60 gallons

Just to be sure, the CST744E that you recommended is a bit smaller than the CST743E that I have right now?

The 10" Drake is comfort height elongated.
Front to back, 28"
The bowl is 16-1/8" high
You can set it on a 9-1/4" rough in

The CST743E is a 12" rough, 26.5" front to back with a bowl height of 14-5/8"
It needs a 10-7/8" rough in.

Great! Thanks for your help Terry!

Last question...is there any difference in noise between the Eco Drake (E-max) and the regular Drake (G-max)? Is the Eco version just as effective with less water?

Similar noise factor, more water always gives better flush.
But the Eco works fine too.