ProPex Fitting Distributors

K

klhwarf

New Member
Messages
3
Reaction score
0
Points
0
Location
NY east coast
Hello, i've started a project using wirsbo aquapex and am looking for suppliers for the brass fittings. I purchased my initial supplies online and was looking for other distributors for a diy'er but have not been very successful in my search.

Any leads on other places to purchase would be appreciated.

Thanks
Kevin
 
I buy most of my fittings from the local plumbing supply house.

-Gil
 
Looking for addidtional distributors

I've been dealing with the online place mentioned in the post above. Dissatisfied with their recent performance (backorders) and the way the fittings were packaged. They are supposedly going to make the poor packaging right by replacing the parts that were subject to loose packaging.

Looking for other places that I can have parts shipped quickly in case I ever have a plumbing emergency with the work being done.

Thanks for your input
 
Like I said, my local plumbing shop carries everything one could ever need. Have you stopped by your local plumbing supply house? Where are you located?

-Gil
 
None of my local plumbing supply stores carry Wirsbo. Zurn and Viega appear to be the most widely available here in south central pa
 
You must log in or register to reply here.

Similar threads

B
Washing machine single-lever shut off valve with 2 9/16" center spacing
Replies
0
Views
1K
bcn
B
Larry Schwarcz
Lead Free brass fittings with small amount of lead? How safe are they?
Replies
4
Views
2K
GReynolds929
GReynolds929
sajohnson
Correct supply line fittings needed to clean up undersink water filter installation
Replies
1
Views
1K
sajohnson
sajohnson
rmcderm313
Advice removing cap for main septic cleanout
Replies
11
Views
552
Jeff H Young
Jeff H Young
D
Remove "all" the lead?
Replies
5
Views
2K
diy'r
D
Back
Top