Looking to purchase a Delta 600 shower faucet unit

S

Swartz_2007

New Member
Messages
4
Reaction score
0
Points
0
Location
Norfolk Va
I am working with a psych hospital and I need a complete Delta Model 600 Shower valve with lever control knob[/B] to simulate the facility. Does anyone have one of these out-dated units in stock. New or Used does not matter. If you do have one (not just parts) Please write to me directly at patrick_keller2007@yahoo.com
 
Detla Model 600 Shower Valve

No I need a Delta Model 600 shower valve. I am not replacing them because of cost. I am installing a custom made cover that prevent patients from hanging themselves. I need the unit for the factory to customize the cover. If you look at www.norvaplastics.com under their suicide prevention products and you will see what I talking about. thanks Pat
 
IN that case, I will check later today, because I should have a body which I would normally use to disassemble when someone wrecks their valve while taking it apart. With the body, you can install a readily available cartridge and trim plate.
 
You must log in or register to reply here.

Similar threads

P
Delta Faucets don’t match
Replies
0
Views
713
Parttim3r
P
Jeff Jot
angst with brand new MIXET shower valve - weird behavior
Replies
1
Views
812
GReynolds929
GReynolds929
Ereitz
Delta Scald-Guard, 1980s shower knob replacement (to lever)
Replies
2
Views
3K
Terry
Terry
S
Max flow shower valve
Replies
9
Views
6K
John Gayewski
John Gayewski
S
Is this shower rough in plumbed wrong? And would you accept the "wonky" correction?
Replies
9
Views
3K
John Gayewski
John Gayewski
Back
Top