What kind of spigot insert is this?

M

mikeu1

New Member
Messages
1
Reaction score
0
Points
0
Location
Naperville, IL
I need to replace an insert on the spigot on the side of my house and kind figure out what kind this is, or where I could get a new one. The house is about 40 years old, probably the original spigot. Came with a metal handle, full turn to get it going, definitely not a newer model. Links to the pics below, any help would be appreciated. Thanks, Mike

http://www.interlope.com/spigot1.jpg
http://www.interlope.com/spigot2.jpg
 
Looks like the shaft of a frost proof hose bib. Even knowing the brand I think yor are going to have a hard time replacing it, 40 yrs is a long time for a manufactor to carry parts.
 
Could you make the pictures any larger? That part is too generic to give you an answer. The valve itself should have identification. If not, and even if you do find the manufacturer, the odds are that the pattern has been modified MANY times since yours was made.
 
It does not, if we are talking about the same item, these old Prier stems were made of brass rod and the washer was stopped by deforming the rod, newer style feature the enlargement that stops the washer in the correct spot.
 
You must log in or register to reply here.

Similar threads

T
Is "Adia" a shower valve manufacturer?
Replies
1
Views
3K
TJRAD
TJRAD
F
Irregular water meter setup
Replies
4
Views
601
Jeff H Young
Jeff H Young
abearatemyparents
New pump installed in apparently dry well, trying to figure out what to do.
Replies
14
Views
2K
Reach4
Reach4
F
Sanity check on well water filtration setup (iron, manganese, hardness, arsenic)
Replies
5
Views
519
Reach4
Reach4
R
Help with OLD Woodford outdoor faucet model identification
Replies
5
Views
8K
robcon27
R
Back
Top