View Full Version : Good source for plumbing parts?

09-11-2005, 06:33 PM

Could someone point me to the good source for plumbing parts on
the Internet?
I spent couple hours sourcing Internet and finally gave up.
Well, I can find everything but not what I was looking for.
In particular, I need 3/4 Meter Union (with rubber washer)
and Solder Union for the N35B Watts Pressure Regulator
(this union has rubber o-ring). My local Home Depot (Newton, Ma)
does not have anything sutable at all.

Thank you,

- Vitaliy

09-11-2005, 06:55 PM
Why don't you go to a good local plumbing supply store and pick them up. they are not Home Depot or Lowes items. If you order them on the Internet you will have to trust that they send the right items and you will have to pay shipping also.

09-11-2005, 07:03 PM
Hi HJ,

Sure, I will go to the local plumbing supply store if I know where one is.
Could you please point me one around Newton or Chelmsford
in Massachusetts?

Thank you,

- Vitaliy

09-11-2005, 07:41 PM
I have a contact back there, and have asked him for a source for you. Will let you know. ( I grew up in Newbury; both my parents' families were from Waltham, and my aunt lived most of her life in Newton.)

Gary Swart
09-12-2005, 12:03 AM
Have you looked in the Yellow Pages? Plumbing supply houses should not be too difficult to locate.

09-12-2005, 06:30 AM
There is a good one in Watertown right near the Arsenal Mall. I cannot recall the name of it but it should be in the phone book.

09-12-2005, 06:47 AM
In Newton there is J.D. Daddario/Ferguson Co. it is right on rte 9.

09-12-2005, 06:57 AM
Try Google...

09-12-2005, 07:43 AM
Try in the phone book for Republic Pipe and Supply; and also try Capco Energy in Chelmsford.

09-12-2005, 06:58 PM
Thank you all for very good and useful info.

- Vitaliy

09-17-2005, 04:59 PM
There's a plumbing supply house in Jamaica Plain on Washington St., but I just can't seem to remember the name. You can't miss it if you drive by it.