PDA

View Full Version : Culligan Mark 812



01jordyn
02-20-2010, 01:07 PM
How does the water get from the salt tank back to the water system. I only have one line going between the salt tank and the mechanism. I see water going in to the salt tank but I can't see how it gets out.

Thanks,

Gary

Bob999
02-20-2010, 01:31 PM
The control unit draws the brine from the salt tank through the same tube that is used to carry water to the salt tank. A description of the process is here:

http://www.popularmechanics.com/home_journal/how_your_house_works/1275126.html

Akpsdvan
02-20-2010, 02:57 PM
What else is there to say?

Nothing..

Peter Griffin
02-20-2010, 04:35 PM
How bout this word Suction :)

Akpsdvan
02-20-2010, 05:13 PM
There is that

Suction ....

Push.....

Gary Slusser
02-21-2010, 01:52 PM
How does the water get from the salt tank back to the water system. I only have one line going between the salt tank and the mechanism. I see water going in to the salt tank but I can't see how it gets out.

Thanks,

Gary
Try this, it is a better explanation than the other link;
http://www.kenmorewater.com/website/animations/water-softener-troubleshooting.html

ogbadboy
04-26-2011, 05:25 PM
Try this, it is a better explanation than the other link;
http://www.kenmorewater.com/website/animations/water-softener-troubleshooting.html

It may be, but is it about a disposable unit like a Kenmore?

Gary Slusser
04-27-2011, 08:41 AM
Except for upflow (counter current) regenerated types, all softeners ave the same components and work the same.