The only thing I know for sure is that sh*t runs downhill, it's the little things that have stumped me. I'm trying to save some room under a sink in a bathroom remodel, and the guy at the plumbing store put this contraption together - but neither of us are plumbers, and he said to "check with a licenced plumber, I just sell the stuff". This is my check.
Basically, I'm using an offset drain with a slight extension and hiding the p-trap in the stud cavity, and I'll cut an access hatch under the sink. Can I have a horizontal, or close to horizontal, drain line like shown with the p-trap tucked away like this or am I violating a rule of physics/code?
I took 2 pictures, one from the side, and one from the front - it's easier than trying to write it all out.
Basically, I'm using an offset drain with a slight extension and hiding the p-trap in the stud cavity, and I'll cut an access hatch under the sink. Can I have a horizontal, or close to horizontal, drain line like shown with the p-trap tucked away like this or am I violating a rule of physics/code?
I took 2 pictures, one from the side, and one from the front - it's easier than trying to write it all out.