View Full Version : Are you tough enough?
08-20-2009, 11:22 AM
One of these is one day going into my 1950s basement rough.
Is it tough enough? I know you do not like to use the plastic ones but I see little alternative for my cast iron application.
08-20-2009, 01:51 PM
Oatey makes a cast version.
Oatey cast repair flange (http://www.oatey.com/Plumber/Shared/ProductGroupDetail/108/165+Cast+Iron+Flange.html)
master plumber mark
08-20-2009, 05:52 PM
we use them all the time...
saves you a lot of greif and misery...
it will work for decades
08-20-2009, 06:47 PM
Plastic flanges get used down here 99.9999999999999% of the time.
08-20-2009, 06:53 PM
They get used here 99.9% of the time and get replaced a few years down the road due to breaking.
08-20-2009, 07:55 PM
THIS IS WHAT YOU WANT TO USE NOT THE PVC TYPE, ! !
add a few more 9's to the decimal and you will have the percentage of broken ones which ARE plastic. A new cast iron flange is the proper installation, therefore the one you describe is not the "only" solution.
08-22-2009, 11:19 AM
Ian, skip the plastic junk!