I just bought a laundry list of new plumbing materials from a contractor off Craigslist that bought the materials to do a job that was later cancelled Here's what I have:
1 24 port MANABLOC whole house water distribution manifold
comes with: wrench, deluxe installation kit, mounting bracket, closet mounting cover, 5- safety caps.
1 washer rough in box with stainless steel 1/4 turn valves
12 8" X 1/2" crimp copper stub-out elbows
10 1/2" crimp tees
10 1/2" staight stop 1/4 turn stainless steel valves
10 1/2" barb X 1/2" MPT adapters
10 1/2" barb X 1/2" FPT swivel adapters
100 1/2" stainles steel crimp rings
1 stainless steel crimp ring tool
1000' 1/2" clear pex tubing
All of the brass fittings and tubing are Zurn and the Crimping rings and tool is Wirsbo. My question is: Are these compatible? Thanks
1 24 port MANABLOC whole house water distribution manifold
comes with: wrench, deluxe installation kit, mounting bracket, closet mounting cover, 5- safety caps.
1 washer rough in box with stainless steel 1/4 turn valves
12 8" X 1/2" crimp copper stub-out elbows
10 1/2" crimp tees
10 1/2" staight stop 1/4 turn stainless steel valves
10 1/2" barb X 1/2" MPT adapters
10 1/2" barb X 1/2" FPT swivel adapters
100 1/2" stainles steel crimp rings
1 stainless steel crimp ring tool
1000' 1/2" clear pex tubing
All of the brass fittings and tubing are Zurn and the Crimping rings and tool is Wirsbo. My question is: Are these compatible? Thanks