PDA

View Full Version : Shower Faucet Identification



vp70
04-19-2009, 09:35 AM
Hi, I am wondering if someone can help me identify my shower faucet cartridge. I need to replace a cartridge cause its leaking. Thanks in advance!

Redwood
04-19-2009, 10:41 AM
A view showing the shape of the stem on top and the inlets and outlet on the bottom would help... A lot!

Have a look see at this link...
http://www.arpny.com/pdf/single.pdf

vp70
04-19-2009, 07:11 PM
Thanks for getting back to me so quickly. I am attaching more pictures with different angles. I think i found correct match thanks to your link.
Can you please confirm that this is EZ-FLO Model number is EZF7008, Page 24.

Thanks.

SewerRatz
04-19-2009, 07:27 PM
I looked through all the pages where where a few that where close match like the Kohler KOH7014 is a close match for the upper half. But EZ-FLO Model number is EZF7008 seems to be a much better match except for the red plastic around the lever. The body is a spot on match though.

Great link Redwood. I bookmarked that bad boy. Much more up to date than my 2002 Perfect Match Kit catalog.

Dunbar Plumbing
04-19-2009, 07:28 PM
Looked like ezflo to me as well.

Redwood
04-19-2009, 08:18 PM
Looks like you guys figured that one out...


Great link Redwood. I bookmarked that bad boy. Much more up to date than my 2002 Perfect Match Kit catalog.

Actually use this link instead...
http://www.arpny.com/
They have stems, flush valves, fill valves and a bunch of other stuff as well.

vp70
04-19-2009, 09:15 PM
Thanks everyone for your help. Where can I purchase this item?

kingsotall
04-19-2009, 09:45 PM
That link just saved my you know what too! Thanks Redwood! :D

Redwood
04-19-2009, 11:39 PM
Thanks everyone for your help. Where can I purchase this item?

On the page that i linked there is a phone number to call and order.

SewerRatz
04-20-2009, 05:43 AM
Thanks Redwood, I wish Just Faucets would spend a few bucks on a site like that. I have ran into some really oddball stuff , and they always had the parts. The above link will come in real handy to save me lots of research time.

Redwood
04-20-2009, 10:47 AM
The only problem with it is they use their own part number system so the information other than the manufacturer who uses a particular cartidge is of little value unless you are buying the parts from them...

If you walk in and ask someone at the local supply house for a # EZF-7008 they will give you that look like you have a third eye in the center of your forehead...:eek:

kingsotall
04-20-2009, 08:56 PM
LMAO @ Redwood!

That's what happened today buddy! lol :cool: