Rockycmt
Member
Supply lines.
1/2 inch coming up from basement. The original had solder 90 degs to a 1/2 1/4 turn valve. I have seen in the past some rough ins 1/2 in copper soldered to a 90 deg female. And a nipple is used to the 1/4 turn valve. Which is a better approach? and Why?
1/2 inch coming up from basement. The original had solder 90 degs to a 1/2 1/4 turn valve. I have seen in the past some rough ins 1/2 in copper soldered to a 90 deg female. And a nipple is used to the 1/4 turn valve. Which is a better approach? and Why?
