cicerored
New Member
Hi Everyone,
I am in the process of drawing up plans to get my permit for my basement renovation. When we built the home, I had a half bath roughed in. Now I have decided that I might as well add a neoangle shower (2" drain). The current situation rough in is a 1.5" drain/vent for the sink and a 3" for the toilet. I want to connect to the 3" drain pipe that the toilet discharges to. Looking down the 3" stub, it seems to be pointing in the right direction. I am not sure about venting. The toilet, I believe, is wet vented through the sink vent. I have attached a fairly detailed diagram of my intended bathroom setup (nothing has been framed). I know I will have to break up the concrete, which I intend to do with a hammer drill, manonary chisel, and small sledge, but I am unsure of the pvc connectors to use (tee, wye?) and the venting. If anyone wants to take a look or has any idea how to better do this, I would appreciate it.
Thanks again,
Cicero (NY) Red
I am in the process of drawing up plans to get my permit for my basement renovation. When we built the home, I had a half bath roughed in. Now I have decided that I might as well add a neoangle shower (2" drain). The current situation rough in is a 1.5" drain/vent for the sink and a 3" for the toilet. I want to connect to the 3" drain pipe that the toilet discharges to. Looking down the 3" stub, it seems to be pointing in the right direction. I am not sure about venting. The toilet, I believe, is wet vented through the sink vent. I have attached a fairly detailed diagram of my intended bathroom setup (nothing has been framed). I know I will have to break up the concrete, which I intend to do with a hammer drill, manonary chisel, and small sledge, but I am unsure of the pvc connectors to use (tee, wye?) and the venting. If anyone wants to take a look or has any idea how to better do this, I would appreciate it.
Thanks again,
Cicero (NY) Red
