Jetted Tub Switch

I work on jetted tubs only occasionally.

Most have air switches. The one I looked at yesterday has a dime sized wafer touch switch that works, I am guessing, like the touch lamps.

You just touch the switch and the and the pump turns on or off. . It has 1 low voltage wire going to the pump.

Is anyone familiar with this and / or does anyone know where to get replacement switches for this.

Thanks

switch

You get it from the tub manufacturer, and any problem with it is usually in the control box. The switch is just a touch plate. When I have installed them and told the customer that THEY are part of the electrical circuit when they touch the plate, (which is why they have to be in the tub when they touch it), they sometimes become unnerved thinking about mixing electricity, water, and themselves.

I checked and I am not sure who made the tub but the pump motor is a Magnatek brand. Does anyone know who manufactures the motor? I have looked on line with no luck.

pump

Try magnEtek and you will find a lot of sources, one of which has both pneumatic and electronic controls.