homeownerman
New Member
- Messages
- 6
- Reaction score
- 0
- Points
- 0
Hi. I have a concrete slab floor. There is a hole somewhat larger than the diameter of the pipe and there doesn't seem to be much if anything but air surrounding the riser from what I can see. The riser is 8-9 inches tall or so. The top of the flange is about 3/4 of a inch above the slab in the front and about 1/2 inch above the slab in the back. The flange is not attached to the slab at all. The flange is part metal and part ABS and attached to ABS pipe. One of the slots for the toilet mounting bolts looks to be in bad shape and rusted beyond use. I have removed the old congoleum so I can fix this problem. I plan on using a nice thick tile for the new floor. I want to fix this problem so my toilet can be firmly attached to the floor. Thanks