PDA

View Full Version : Toto Flush Problem



ejb
08-02-2007, 01:58 PM
I have a Toto Ultimate toilet. It is six weeks old and is now not flushing properly. The normal action is that when flushed, the bowl fills up with water which then gets sucked down rapidly.

Right now, the bowl fills, but the rapid suction is gone. The water just empties slowly, resulting in waste being left behind. Is this just a clog and I need to get a snake at home depot or is this a problem with the mechanism?

I'm not used to this new type of toilet and I'm surprised that it is acting up already. All new plumbing was put in so I wasn't expecting any clogs this soon.

Terry
08-02-2007, 05:12 PM
Try pouring a five gallon bucket of water in the bowl.

You may have something in the trapway preventing the siphon action.

ejb
08-03-2007, 12:01 AM
Thanks,

That worked like a charm and it was very simple. I'm glad I didn't rent that snake!

ejb
08-08-2007, 09:05 AM
The clog in the toilet returned after a few days and has gradually gotten tougher to clear. Now flushing with the 5 gallons of water only clears it up for one or two flushes. I am now also having to pour multiple buckets before it starts to clear. What should be my next step?

Terry
08-08-2007, 09:07 AM
You may try an auger with the large end on it.
The ones we use are about 1.5" in diameter.
A snake will go right by some things.
Here is what a snake missed by another plumber

http://www.terrylove.com/images/terry/gi_joe.jpg