PDA

View Full Version : Need toilet w/ short distance to wall



django1002
06-18-2007, 05:52 PM
Hi,


I may be asking too much.

I have about 28 to 29" from Front of toilet to wall.
I am looking for a Toilet with 16-17' seat
hight and good flushing. Elongated would be
great, but secondary.

In antoher room I have a Gerber with power flushing,
but it is too deep to fit in this bathroom.

In other words--not too deep but a tall seat.


Anythoughts?

Thank you

Terry
06-18-2007, 06:13 PM
The Gerber is a bit long.
Cimarron is long too.

Toto makes elongated ADA that are 28" long.
ADA Drake CST744SL

They also have a round bowl that is 16-1/8" high and 26.25" long, the CST733S Dalton.

Their dual flush Aquia is elongated at 27.25" long and 15.125" high

cpqal
09-26-2007, 09:15 AM
I had the exact same desire. I wanted ADA height and elongated bowl for a small bathroom where I was trying to keep the depth to a minimum. The "non-elongated" Dalton at ~26.5" was the shortest depth I could fine and the "only" ADA height non-elongated toilet that I could fine. I settled for it and have not missed the elongation at all and I'm 6'4" and 285#. The taller and deep bowl design seems to make me not miss the extra length (and I have 2 other elongated toilets). I continue to be just amazed that this thing flushes so well with so little water.