sinkholed
New Member
- Messages
- 23
- Reaction score
- 0
- Points
- 0
Bathroom remodel is down to studs, all except for removal of 3-walled 60"x30" tub. Managed to disconnect drain and remove nails from nailing flange, but tub still won't budge. Looks like underside of tub is approx 2" off of subfloor; I thought the bottom of tub is usually flush with its sides, so it too would be sitting on the subfloor??? Instead, it looks like there are metal "feet" at each corner that were nailed into the subfloor.
Looks like I'm going to have to sawzall the tub out of there. I tested a cut using a 5" 12tpi bi-metal blade that I had, but I need to get more blades. What would be the best blade to use for this, and any other hints you can give me for cutting/removing this tub would be most appreciated. Thanks.
Looks like I'm going to have to sawzall the tub out of there. I tested a cut using a 5" 12tpi bi-metal blade that I had, but I need to get more blades. What would be the best blade to use for this, and any other hints you can give me for cutting/removing this tub would be most appreciated. Thanks.