Activity Stream

I was having some issues with my pump tec last summer. it seemed like just connection issues within the pumptec itself.Sometimes the wells pump...

Recently I have started telling everyone I can about "Raj's SEO Services" . Raj is a great marketing Guru and has an easy trick to guarantee you...

Hello, First post here. I just had some major plumbing work done after gutting my basement and ridding myself of my convential central AC. ...

Years ago I ran a 2" PVC conduit from my electrical panel on the first floor up to my unfinished second floor when I closed the wall that the panel...

I interviewed with the Plumbers Union of Dallas last summer and did not get accepted into there school. So i was put as provisionary plumber and...

OK ............. I have a question or two, but I do not want to make this a long thread. So, just in case anyone wants to see more information from...

Last night the topic of buying material from the large box stores came up. Who here shops at a local box retailer? I try and avoid ever having to...

Hey Guys, I have a Burnham boiler with a Weil McClain indirect WH tank attached to it. I've noticed recently that water has been leaking from the...

Just removed all the tile, 4 inches of cement, and the old shower liner and this is what I'm left with. Any ideas or suggestions on how to get this...

So I'm replacing an old vanity with a new one, and I'm a bit perplexed by the P trap that comes with the vanity sink - see pages 5-6 here:...

I live in Boston, MA and am finally getting around to replacing a very old oil boiler (perhaps converted from coal and original to our 1926-built...

My toilet began making a banging noise when shutting off, I noticed the ball type float valve would get nearly full, then slam shut, so I replaced it...

A question or two on residential service upgrade from 60 to 200 amp. I know that in many places the service upgrade is done (new feed to can, new...

Hi guys, thanks for the great forum here. Helped me install a Grundfos at 300' without a hitch. So here's the situation: My wife and I bought 40...

Have a roof covering my patio and now want to install a couple receptacles, a switch and a ceiling fan on the framing members under the roof. Power...

I have an old hose bib that's leaking and I want to replace it with a ball valve. I already did the backyard with the help of folks on this site. ...

One in the basement (washing machine) Two on the first floor The three outlets are dead, no power All three worked fine up until now So Far: I...

Hello All, Last winter a pipe in an outer wall first floor bathroom busted due to the freezing cold and there being no central heat on in the...

First let me say that if I am posting this in the wrong area please let me know and I will be more than happy to move. I would appreciate some...

I am putting in an island as part of my kitchen remodel. It will be 72" long with a 10" overhang for a total of 82" on the long end, cabinets on one...

Hello all, My first post here -- hopefully first of many as I begin to finish my basement! The first task I will be tackling myself is the...

Hey guys i have a question for you. I have posted in the recent past about my water quality (sucks 3,600 TDS!). I am thinking about spending...

About 9 yrs. ago we moved into our current house & so began my education with well systems & water treatment. I've had various problems over the...

Hi, I realized that I didn't inform the plumber I would be using a hand shower that is held at a bar, and he set the pipes for a head shower. I...

Well,the pics are out of order. The top Pumpec #1 pic is the current one on my well. The #2 pic( just above this post) is the newly bought...

The gardener has removed all the back flow preventers on the hose bibs of my house. He tells me that they restrict the flow too much. I have told...

1. Is it okay to have one half of an outlet it's own circuit, such as for an air conditioner? (yes, I broke off the tabs) 2. Can I have multiple...

I have two outdoor faucets that are leaking. I am in Phoenix, AZ (very hard water) and wanted to change out the existing brass fittings for ball...

I decided to begin another thread as the other was getting too long & too wordy .................. hope this is acceptable! As of today, I have...

I'm running 4 legs @ 125' long to the garage.( 10 guage THHM stranded southwire ) Two conductors ( hots ) One neutral and a ground.. I'm running them...